25kVA~500kVA Variable Voltage Transformer / Voltage Regulator / Voltage Regulator / Autotransformer

General Information:By changing the position of the contact position of the brush and the polished surface of the ring-shaped winding to change the turns ratio of the primary and secondary windings, the regulator that finally achieves the main purpose is called a ring regulator. Ring contact type electric voltage regulator is a

Featured Products

General Information:
By changing the position of the contact position of the brush and the polished surface of the ring-shaped winding to change the turns ratio of the primary and secondary windings, the regulator that finally achieves the main purpose is called a ring regulator. Ring contact type electric voltage regulator is a large contact type electric voltage regulator, which is a replacement product of inductive voltage regulator. Appearance, weight, volume, efficiency, waveform, operation, installation and maintenance are better than the same power induction voltage regulator. Suitable for industrial and mining power, hospitals, national defense, scientific research and other departments as a continuously adjustable test power supply.

Working Conditions:
  • The altitude does not exceed 1000m.
  • Indoor use.
  • The average relative humidity in the wettest month is below 90%, and the average minimum temperature in the month is 25ºC.
  • There should be no gas, steam, dust, dirt, chemical deposits and other explosive and aggressive media that seriously affect the insulation of the voltage regulator.
  • There should be no serious vibration and bumps in the installation site.
  • The waveform of the power supply voltage is similar to a sine wave.
  • The three-phase power supply voltage is approximately symmetrical.

Technical Specifications:
 
NameSingle-phase contact type electric voltage regulator
ModelEP2J-50kVA
Rated Input voltage:AC: 220V (single phase)
Output voltage:AC0-240V
Output current:208A
Frequency:50-60Hz
Recommended lead cross-section mm250
Dimension600(L)*600(W)*1500(H) mm
WeightAbout 250kg

The following are some common products of EP2J series electric voltage regulators/Variable transformer produced by our company. Other special specifications are welcome to consult EP Hipot Electric.
 
ModelOutput range(V)Output current(A)Product size L*W*H(cm)
EP2J-50KVA0~25020063*60*150
EP2J -63KVA0~250252120*70*170
EP2J -80KVA0~250320120*70*170
EP2J -100KVA0~250400120*70*170
EP2J -125KVA0~250500120*70*170
EP2J -50KVA0~4306763*70*170
EP2J -63KVA0~4308463*70*170
EP2J -80KVA0~430107120*70*170
EP2J -100KVA0~430134120*70*170
EP2J -125KVA0~430168120*70*170
EP2J -160KVA0~430215150*120*170
EP2J -200KVA0~430269150*120*170

This series to be customized according the customer's requirements. More details on 1 Phase 3 Phase Voltage Variac Regulator please contact EP Hipot Electric, we have professional tech team to design correctly designed products and systems.

25kVA~500kVA Variable Voltage Transformer/Voltage Stabilizer/Voltage Regulator/Voltage Variac
25kVA~500kVA Variable Voltage Transformer/Voltage Stabilizer/Voltage Regulator/Voltage Variac

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours